App Data-Logging Screen
Rotating your device to the right will show the data logging screen. You can select
any point on the graph, and it will show you the values at that point. You can
pause, and zoom in and pan to a section, and hitting save will copy a screenshot to
your photos. The data-logging has a limited buffer, so you should hit pause if you
want to look at a specific event that just happened.
Installation
Flex Sensor Installation
The picture below is representative of the factory configuration of your
vehicle. You will have fuel lines that come from the gas tank and go
through a fuel filter before reaching the fuel rail that feeds the fuel
injectors. The factory ECU is connected to each individual fuel injector
through the factory wiring harness. There may
or may not be a return line.
10
3
1)
Install Flex Fuel Sensor anywhere in the fuel lines. A good place is at
the fuel filter. Make sure the Flex Fuel Sensor connector on the
Multi-Gauge wiring harness is able to reach the sensor.
3)
Make sure to secure
the sensor. Too much
vibration will cause
sensor errors.
2)
You can use the supplied fuel line adapters to connect the Flex Fuel
sensor to the fuel filter. If the adapters are the wrong size, you can
simply use the rubber fuel line and hose clamps.
