App Settings Screen
Introduction
The Alternative Performance Engineering Multi-Gauge is the most advanced
Ethanol Content sensor available in the market today. The Multi-Gauge also
has two generic 5V sensor inputs that can be used for additional sensors like
a wideband or map sensor. All of this data can be monitored and data-logged
wirelessly via Bluetooth Low Energy on our Android or iOS application.
The Multi-Gauge also provides a raw ethanol sensor output with built in 10K
pullup resistor to 5V so you can use it on a vehicle that already has a flex
sensor.
12
1
Hit the Save
button after any
changes are made
Display Name is
what is shown
when Gauge is in
the Center.
Abbreviation is
what is used
when Gauge is in
the corner.
Can turn off
Gauge 1 Display
on dashboard if
not used
Displays Module
Firmware and
App Version
The Color ranges
for when this
gauge is selected
for the center can
be defined here.
A visible warning
range can be set
for each gauge
here.
Settings Tab
Pass Key not
used for Multi-
Gauge
Changes Gauge
Trim from silver
to black
How you enter the values in the 0V and 5V boxes will be how the numbers are
displayed on the Gauges. For example, of you put 7.35 and 29.4, the gauge
will display 2 decimal points. If however you put 7.4 and 29.4 the gauge will
only display one decimal point, and if you put 7 and 29 then the gauge will not
display a decimal point. You can also enter 0% and 100% if you want it display
the number as a percentage.
Gauge scaling
values, see below
for formatting
rules.
