App Dashboard Screen
Selecting either Gauge 1 or 2 in the top corners will swap that gauge into the
center and put the Ethanol Content in the corner. If you set the warning
range in the settings tab and your gauge hits that range, the gauge will turn
red.
Gauge 1 & 2 Installation
8
5
8)
The Red and Black wires can be used to provide power to 5V
sensors.
9)
0V-5V sensor outputs can be connected to the Green wire for
Gauge 1 and the Orange wire for Gauge 2.
10)
The Purple wire is the raw Flex Fuel Sensor output with a 10K
pullup to 5V on the module. This can be connected directly
to an ECU
11)
Plug the Multi-Gauge Module into the harness and mount in
your car.
12)
Now it is time to start up the APE app on your phone.
