15
DC Gauges
Selecting either Gauge 1 or 2 in the top corners will swap that gauge into
the center and put the Ethanol Content in the corner. The scaling and
visual appearance of the gauges can be configured in the settings tab. If
you set the warning range in the settings tab and your gauge hits that
range, the gauge will turn red.
12
Gauge 1 & 2 Installation
Example:
APE Pressure Sensor
0.5V = -14.5PSI
4.5V = 30PSI
1)
The Gauge 1 and Gauge 2 plugs are prewired to work with
the APE Flex Fuel Pressure sensors. We also include a plug so
you can wire in any 5V sensor.
2)
Plug the Flex Boost Module into the harness and mount in
your car.
3)
Now it is time to start up the APE app on your phone.
4)
Use the sensor manufacturers specifications to configure
Gauge 1 & 2 in the settings tab.
Red - 5V
Black - GND
Blue - Signal
Green: Gauge 2
input (0V-5V)
Orange: Gauge 1
input (0V-5V)
Summary of Contents for Flex Boost
Page 2: ...1 26...
Page 27: ...1 26...
