7
Module Passkey
On the back of the Flex Boost Module there is a sticker that looks like this.
This indicates the Serial Number (SN) and the Passkey (PK) that is used by
the IOS or Android app to allow the user to alter any of the default
configuration parameters of the device. It is recommended that you note
the Serial Number and Passkey here in your manual for future reference
in case it is not readable after the Flex Boost Module has been mounted
in your car.
Flex Boost Serial Number:
Flex Boost Passkey:
SN:
APE-FB-XXXXX
PK:
YYY
APEFlexFuel.com
Contains TX FCC ID: 2AB6YHM-1011V1
20
RPM Based Boost Control
You can raise or lower the Boost Controller duty cycle across four
separate configurable RPM bands. You must have the Tach input enabled
and configured correctly for this to work. We recommend setting a RPM
range below idle, and then setting it to -100% in order to keep the Flex
Boost solenoid from clicking when the engine is not running.
Range 1 is setup
here to turn off
the solenoid when
the engine is off
0% means the
duty cycle is set by
the basic settings
above, you can
increase or
decrease each
RPM range as
much as you like.
Changing the RPM
range in one range
will affect the
others.
Summary of Contents for Flex Boost
Page 2: ...1 26...
Page 27: ...1 26...
