APE 20-5 Owner'S Manual Download Page 35

Page: 35 / 38

Page 33

REFERENCES & NOTES

ILE

DRIVING E

DAT

ION EQ

UIP

MODEL 20-5 HIH

800-248-8498

WWW.AMERICANPILEDRIVING.

com

Bolt Reference

RECOMMENDED BOLT TIGHTENING TORQUE

“LUBRICATED SHCS”

Recommended Anti-Seize Lubricant

BENEFITS & FEATURES

•

Excellent Anti-Seize

Prevents seizing causing by galling, galvanic action, fretting, fusion, pitting, thread distortion, breakage, rust, and corrosions.

•

Water Resistant

Provides long term protection with just one application, outdoors or indoors, even in the damp areas or against salt spray. Will not wash off.

•

Wide Temperature Range

Coating withstands temperatures of -65 Degree F to 2100 Degree F. (-54 C to 1100 C)

•

Stable Coating

Will not harden or fuse to metal, cake, evaporate or separate

•

Compatible with many materials

Can be used as an anti-seize on the threads of steel, stainless steel, steel alloy, cast iron, aluminum, copper brass, and titanium parts and reduces friction and wear on plastic.

•

Environmentally Desirable

Past contains no lead compounds traditionally found in this type of product.

When installing any APE equipment or parts apply lubricant and use APE

standard

Anti-Seize

torque specs.

See Tightening Torque Spec below. Failure to follow tightening torque spec

can result in under / over tightening fasteners, leading to equipment failure

or personal injury.

Socket Head Cap Screws

WARNING: USING OTHER TYPES OF ANTI-SEIZE NOT

RECOMMENDED

BY APE CAN LEAD TO EQUIPMENT FAILURE OR PERSONAL INJURY.

WARRANTY WILL BE VOIDED AND FEES MAY APPLY.

Nominal Screw

Size

Nominal Socket

Size

Tightening Torque

(ft-lbs)

#10-24

5/32

.25-20

3/16

.31-18

1/4

.38-16

5/16

.44-14

3/8

.50-13

3/8

.63-11

1/2

179

.75-10

5/8

317

.88-9

3/4

511

1.00-8

3/4

767

1.25-7

7/8

1,533

1.50-6

2,668

Nominal Screw

Size

Nominal Socket

Size

Tightening Torque

(ft-lbs)

#10-32

5/32

.25-28

3/16

.31-24

1/4

.38-24

5/16

.44-20

3/8

.50-20

3/8

105

.63-18

1/2

202

.75-16

5/8

354

.88-14

3/4

564

1.00-12

3/4

860

1.25-12

7/8

1,697

1.50-12

3,001

COARSE THREADS

FINE THREADS

Summary of Contents for 20-5






































Search results

Summary of Contents for 20-5

Reviews:

Related manuals for 20-5

Brands by name

Popular brands

APE 20-5, Owner'S Manual

Search results

Summary of Contents for 20-5

Reviews:

Related manuals for 20-5

Brands by name

Popular brands