Page 28
MAINTENANCE & TROUBLESHOOTING
AM
ER
IC
AN
P
ILE
DRIVING E
QU
IP
M
EN
T
J&
M
F
O
UN
DAT
ION EQ
UIP
M
EN
T
MODEL 20-5 HIH
Copyright © 2022 American Piledriving Equipment Inc. All Rights Reserved
800-248-8498
800-248-8498
WWW.AMERICANPILEDRIVING.
WWW.AMERICANPILEDRIVING.
com
com
Maintenance
Maintenance Chart
In addition to keeping the unit in ideal
condition, regular maintenance will help
prevent unexpected machine downtime
by finding minor issues before they can
develop into serious or dangerous problems.
Lubrication, inspection, and replacement of key
parts are the major steps of this maintenance.
Lubrication is especially important and different
components have their own schedules and
lubrication types. Pay special attention to the
lubrication steps noted in the chart above.
At each scheduled interval perform all previous
checks which are due.
During all steps be sure to:
•
Thoroughly clean all lubrication fittings,
caps, filler and level plugs along with their
surrounding surfaces before servicing.
• Prevent dirt and other contaminants from
entering with lubricants.
These service intervals are for normal
operating conditions. Reduce the time by half
when:
•
The average temperature is above 80°F
(26°C) or below -10°F (-23°C).
•
Operating in a dusty or sandy area.
•
Operating for more than 12 hours per day.
Environments that are humid and/or salty do
not change the service intervals. However,
during all procedures check the components
for corrosion.
DAILY
•
Grease Guide Column at all grease fittings in the ram
•
Grease Striker plate 20-30 shots at the beginning of shift and 4 shots every 2 hours
•
Grease Lead Guides
• Check Condition of Cushion
•
Check Ram Connection Cushion and Bolts
•
Check all bolts on lead guide rails.
•
Inspected lead guide rails and welds for cracks
•
Inspected all hoses and fittings on cylinder manifold
•
Check Retaining Ring Bolts