APE 100 WICK, Operating And Maintenance Manual

Page: 35 / 65

PARTS LIST
VII-1
MODEL 100
BOTTOM DRIVE
WICK INSERTER
VIII. ORDERING PARTS
A. PROCEDURE
1. When ordering parts, be sure to include the model and serial number of the unit or
component. Confi rm all telephone orders immediately to avoid duplicating shipment.
2. ORIGINAL EQUIPMENT; Where component serial numbers are given, these apply
only to equipment and components originally furnished with the unit. Where equipment
has been changed or upgraded these numbers may not be an adequate description.
3. SHIPMENT; State to whom shipment is to be made and method of shipment desired,
otherwise our own judgement will be used.
4. SHORTAGES; Claims for shortages or errors should be made immediately upon receipt
of parts. No responsibility will be assumed for delay, damage or loss of material while in
transit. Broken, damaged or lost material should be refused or a full description made
of damage or loss to the carrier agent on the freight or express bill.
5. RETURN OF PARTS; If for any reason you desire to return parts to the factory or to
any distributor from whom these parts were obtained, you must fi rst secure permission
to return the parts. Shipping instructions will be given along with this permission. A
ten percent handling charge must be assessed against the returned shipment unless
an error is made by the factory or by the distributor when fi lling your order.