APE 100 WICK, Operating And Maintenance Manual

Page: 3 / 65

MODEL 100
BOTTOM DRIVE
WICK INSERTER
APE MODEL 100 BOTTOM DRIVE
WICK INSERTER
MAN 100 WICK-200805
PREFACE
This manual was prepared to acquaint the owner, operator
and serviceman with the operation and maintenance of the
vibratory driver/extractor. We strongly suggest that this manual be carefully studied
before operating or undertaking any maintenance work on the unit. It is not meant
to be all inclusive as to content, and any questions and/or doubt should be directed
to APE before proceeding with any operation or maintenance.
This manual is organized into two major categories.
The fi rst category is for OPERATING INSTRUCTIONS of the unit and includes a GENERAL
DESCRIPTION section, which presents a basic explanation of the driver/extractor
specifi cations. The MAINTENANCE AND ADJUSTMENT section should be referred to
for all servicing of equipment. All machines and equipment require systematic, periodic
inspection and maintenance, if they are to perform satisfactorily.
The second category is for parts ordering and it includes both a PARTS LIST and a pictorial
drawing of the assembly. Refer to the ORDERING PARTS section of the PARTS LIST for
more specifi c procedures regarding parts ordering. Adherence of the listed procedures will
insure receipt of the required part(s) with the minimal amount of delay or error.
APE reserves the right to update or revise this manual as required, check with APE for
current release date.