APE 100 WICK, Operating And Maintenance Manual

Page: 33 / 65

PARTS LIST
VI-1
MODEL 100
BOTTOM DRIVE
WICK INSERTER
VII. GENERAL DATA
A. ABBREVIATIONS
The abbreviations shown below are used throughout the parts lists and various other parts
of the manual.
ASM. Assembly
BHCS
Button Head Cap Screw
Cyl. Cylinder
DC Direct
Current
FHCS Flat Head Cap Screw
FLCS Flanged Head Cap Screw
HC High Collar
HHCS Hex Head Cap Screw
HHPP Hex Head Pipe Plug
HSSS Hex Socket Set Screw
Hyd. Hydraulic
Lg. Long
mm Millimeter
Mtg. Mounting
NPT. National
Pipe Thread
PHMS Phillips Head Machine Screw
P/N Part Number
Qty. Quantity
RHMS
Round Head Machine Screw
Sch. Schedule
SHCS
Socket Head Cap Screw
SHPP Socket Head Pipe Plug
SHSS Socket Head Shoulder Screw
S/N Serial Number
Sol. Solenoid
B. SCREWS AND BOLTS
1. Practically all connections on the unit are made with socket head (Allen) cap screws.
These high-strength screws are available at most industrial supply houses.
2. Screws and bolts are designated in the PARTS LIST in abbreviated form. (Refer to sub-
section A, above, for specifi c abbreviations.) Listed below is a typical screw description:
0.50 - 13 UNC X 1.50 LG SHCS
0.50 = Diameter 13 UNC = Threads Per Inch
1.50 LG = Length SHCS = Screw Type Abbreviation