13
PROSPEC-2U6M2S - Stereo Input Channel Connectors (Rear Panel)
1/4” TRS Line Input Connectors (Separate Channel "A" and "B" connectors for Left and Right inputs)
Provides for balanced line level inputs to the channel’s left and right inputs.
Design level is +4dBu
Input impedance is 10KΩ balanced
The input signal may be balanced or unbalanced.
If only a single (mono) signal is available, plugging into the Left TRS jack will feed that signal equally to both
Left & Right inputs of the channel (through the Right TRS normaling contacts). Plugging into the Right TRS jack
will break that normalled connection and feed that new signal into the Right side of the channel.
Stereo Line Input Pad Switch (Separate switches for Channel "A" and "B" 1/4" line inputs)
These switches insert a Pad network on the 1/4" TRS inputs to expand the range of input levels these stereo
channels can accept without overload. They should be activated (pushed in) only if the channels Peak LED
illuminates steadily when the level control is at or below 11 o’clock position. NOTE: These switches only affect
the 1/4" TRS input connectors and have no effect on the channels RCA Inputs.
Left And Right RCA Input Connectors
(Separate Channel "A" and "B" connectors for Left and Right
inputs)
Provides for unbalanced line level inputs to the channel’s left and right inputs. Design level is –10dBV
Input
impedance is 10KΩ unbalanced.
