10
NOTE: The user should ensure that any device inserted into the channel’s signal path is capable of maintaining
the signal integrity of the mixer. The device must be able to accept a +22dBu signal without clipping, and have
an output impedance of 100
W
or less and be capable of d22dBu into a 2k
W
load.
1/4” TRS Direct Output Connector
The connector provides an impedance-balanced line level output of the input channel’s signal. This utility
output can be used to feed a multi-track recording device, effects device, or to feed another mixing or
processing device including distributed monitor mixing systems. Operating level is +4dBu
PROSPEC-2U6M2S STEREO INPUT CHANNELS (2)
Source Input Switches - Channel "A"
On Stereo Input "A", the first of these two switches selects the channels analog signal source between a pair of
1/4" Balanced/Unbalanced Line level inputs (with a rear panel pad switch to expand input level range) and a
pair of RCA Line Level Inputs. The second switch selects between the analog signals of the first switch and a
USB Digital Stereo Input.
Source Input Switches - Channel "B" (and front input connector)
On Stereo Input "B", the first of these two switches selects the channels analog signal source between a pair of
1/4" Balanced/Unbalanced Line level inputs (with a rear panel pad switch to expand input level range) and a
pair of RCA Line Level Inputs. The second switch selects between the rear panel signal source (first switch) and
a 1/8" stereo line input connector on the front panel (just to the lower right of Stereo Input Channel "B" on the
front panel.
