4
• Refer all servicing to qualified service personnel. Service is required when the apparatus has been
damaged in any way, such as power-supply cord or plug damaged, liquid has bee spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
• To completely disconnect mains power from this apparatus, the power supply cord must be unplugged.
• Check AC power source for correct voltage and sufficient current capacity.
• Unplug the unit from AC mains before moving, servicing, or cleaning.
• Do not use frayed or damaged power cords or connectors.
• Do not place the unit on an unstable surface.
• Do not operate and immediately unplug equipment from AC mains if liquid has entered the unit.
• Do not plug unit into AC mains if it has physically been damaged in any way.
• Secure and protect ALL cabling to and from the units to prevent they being walled on, pinched, or pulled.
• Do not install the unit in areas of high electromagnetic or RF fields.
• Observe proper procedures for lifting and moving this unit as its weight and size requires that more
than a single person be employed in these operations.
• Should the unit be damaged in any way or contaminated with liquid, have the unit inspected and
serviced by qualified service personnel.
• This unit contains no user serviceable parts. All servicing must be performed by a qualified service
engineer or through APB-DynaSonics or its qualified dealer.
• Operate in accordance with Government Occupational and Health Administration
requirements, specifications, suggestions and regulations or those of any other local governing
requirements where the equipment is to be used or serviced.
