Special conditions for the safe use of products
The suffix “X” of the explosion-proof certificate No. indicates that the product has special conditions for safe use. The specific contents are as
follows:
•
The product cannot be used in places where conductive objects may adhere to the static elimination electrodes
(Static eliminating
electrodes may not work when attached to conductive materials such as carbon and metal foil)
.
•
It should be more than 20mm away from the static elimination object when the static elimination electrode is installed.
•
The distance between the static elimination electrode and the mechanical frame should be more than 10mm.
•
Keep the static-eliminating electrode clean and it is strictly forbidden to dry-clean the static-eliminating electrode support.
•
The power supply unit which does not have an explosion-proof structure must be installed in a non-hazardous location.
•
The maximum length of high-voltage cable is 8m.
•
It is strictly forbidden to open the cover.
•
It is strictly forbidden to rub the surface of the product shell to prevent the risk of static electricity ignition.
Precautions for product use
•
The environment range of products allowed to use:
Temperature
：（
0
～
+50
）℃
Relative humidity:
：
35%
～
75%
Altitude
：
not more than 1000m
•
The product is equipped with a grounding terminal, users should ground it reliably during installation and use.
•
The principle of “No opening with power on” must be observed during on-site use and maintenance of the product.
•
Users are not allowed to replace parts or components of this product by themselves and should work with the product
manufacturer to solve the faults in operation to prevent damage.
•
The electrical parameters of the eliminator are as follows:
Discharge device
Static elimination electrode
Power supply unit
Model
Voltage(V) Frequency (Hz) Needle binding capacity(pF/ group) Primary voltage(V)
Secondary voltage (V)
Frequency (Hz) Capacity (VA)
Insulation class
AP-AB1602A
≤ 7000
50
3.5
100
≤ 7000
50
25
E
110
220
Warning
Warning
•
The installation, use and maintenance of the product should also abide by the product manual and the requirements of the following related
standards and specifications:
GB 3836.13–2013 Explosive environment Part 13: Repair, overhaul, repair and modification of equipment
GB 3836.15–2000 Electrical equipment for explosive gas atmospheres Part 15: Electrical installations in hazardous locations (except coal mines)
GB 3836.16–2006 Electrical equipment for explosive gas atmospheres Part 16: Inspection and maintenance of
electrical devices
(except coal mines)
GB 50257-2014 Explosion and fire hazard environment of electrical equipment installation engineering construction and acceptance specification for electrical equipment
GB 3836.18–2010 Explosive environment Part 18: Intrinsically safe system
•
Read the operating instruction carefully before installing and using the device.
•
The whole equipment must be reliably connected to the ground of the AC equipment and the grounding resistance is less than 1 ohms
during use; Otherwise, it is easy to cause abnormal or even damage of ion bar.
•
It is strictly forbidden to disassemble products without authorization. Internal maintenance and repair must be carried out by professional
personnel.
•
The product is strictly prohibited to touch liquid during use, otherwise there will be abnormal, resulting in electric shock or fire.
•
Power must be turned off during inspecting or replacing the product, otherwise it may cause electric shock or fire.
•
The product is specially designed for removing static electricity and is strictly prohibited for other purposes. Any abnormal use may
cause machine failure, electric shock, fire and other hidden dangers.
•
It is strictly forbidden to touch the electrode needles when power is on, otherwise it is easy to cause fault and electric shock accident.
•
Discharge needle is a sharp metal object, please use it with care.
•
Please check the specifications of the power supply before powering on the product. Any power supply that does not meet the
specifications may cause damage or even failure to the product.
•
Check the power cord regularly. If it is damaged, replace it immediately; otherwise, leakage and abnormal operation may occur.
