9
6.3.2 APPLYING CARE PRODUCT TO THE PAINTWORK
Apply the product only to painted surfaces, never to plastic parts or rubber seals. Using the polishing hood, dab
the care product onto various spots on the surface to be polished. Hold the device firmly with both hands, always
using the guide handle (Position 2 in the overview). Rest the device with polishing hood on the surface to be
processed. Switch the device on using the ON/OFF switch (Position 1 in the overview). Pass the device evenly over
the paintwork. Do not put pressure on the device. The work is carried out by the rotation process, not the pressure
on the paintwork.
First treat the large, flat surfaces such as bonnet, root and boot lid. Then move on to smaller areas, such as doors
and wings. For areas that cannot be reached using the polishing machine, remove the polishing hood and polish
by hand.
6.3.3 POLISHING THE PAINTWORK
After you have used the woven hood to evenly apply and work in the care product, it must be removed and the
paintwork must be polished. Attach the terrycloth hood. Depending on manufacturer/type, the applied polishing
agent must be completely dry. Now completely remove the care product by polishing the paintwork with the
terrycloth hood in the same order in which you applied the polish.
7. MAINTENANCE AND CARE
8. NOTES REGARDING ENVIRONMENTAL PROTECTION
9. CONTACT INFORMATION
Clean the polishing machine after each use. Pay particular attention to ensure the ventilations slots are clean To
do this, use a dry, soft cloth. Do not use aggressive cleaning agents or solvents. Never allow liquids to get into the
device. You can use compressed air at a low-pressure to blow-out the device.
The polishing hoods must be washed by hand in warm water. Leave the polishing hood to air dry.
Store the polishing machine without the polishing hood attached, and without the battery connected. Position the
polishing machine in such a way that the foam of the polishing plate is not distorted. Do not place other objects on
the polishing plate.
Do not dispose of electrical devices with the household waste! Electrical and electronic scrap must be
collected separately and disposed of in an environmentally responsible manner for recycling. Please
contact your community or city administration regarding disposal options for electrical and electronic
scrap.
Labelling according to § 17 BattG (German battery laws): The end consumer is obliged to send batteries
to the dealer for proper disposal or to hand in at an appropriate collection point.
EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
www.eal-vertrieb.com
