background image

2. Filter Duct Installation Instructions

PNEG-1608

 Pathogen Barrier Filter Ducts

9

Filter Duct Frame-Out for 6 Filters

1. Frame out the area for the duct (A) between the truss cords, making sure that the frame (D) is flush 

with the top. 

(See Figure 2C.)

2. Install the attic vent (G) according to the attic vent installation instructions. 

(See Figure 2A on Page 7.)

3. Fill in the area around the hole cut for the vent (G) with insulation (C).

4. Cut a sheet of plywood (B) for XX" x 48-3/4", that should fit on the top of the truss frames (D).

NOTE:

 

Width 48-3/4" is measured from the middle of truss to truss and the length XX" is based 

on the customer.

5. Cut a hole in the plywood (B) the same dimensions as the vent (G) and at the same location within 

the truss frame (D), so that the hole aligns with the vent (G) when the plywood (B) is installed.

6. Apply caulking (F) along the top of the frames (D) where the plywood (B) will be installed and install 

the plywood (B).

7. Apply caulking (F) on top of the plywood (B) where the duct (A) will be installed and install the duct (A).

Figure 2C Filter Duct Frame-Out - 6 Filters

Ref #

Description

Ref #

Description

A

Filter Duct

E

Ceiling

B

Plywood

F

Caulking

C

Insulation

G

Attic Vent

D

Frame-Out

Assembly view

78-1/4"

48-3/4"

D

B

C

E

G

F

F

A

Summary of Contents for PNEG-1608

























Reviews: