AP Machinebouw B.V.
- 1 -
Manual AP silage cutter NP
1.
INTRODUCTION:
Before using the AP silage cutter, please read this manual carefully. Get acquainted
with the regulations. Controlling an AP silage cutter which you are not acquainted
with can cause accidents.
In view of safety AP Machinebouw B.V. advises the silage cutter to be used only by
skilled personnel. Besides this aspect the following regulations must be observed :
A youthful person, younger than 18 years, cannot perform any labour consisting of :
-
the coupling or uncoupling of trailers or instruments to a pulling vehicle,
-
the driving of tractors.
In case you have, after reading this manual, questions considering safety,
controlling or maintenance instructions, please contact your AP dealer or AP
Machinebouw B.V.
Provide this manual to anyone who controls the AP silage cutter.
AP Machinebouw B.V. reserves the right to carry out adjustments in design and
executions to any of the by AP produced silage cutters, without any obligation
regarding formerly delivered AP silage cutters.
1.1
Options within the manual:
The AP silage cutters can, either by the manufacturer or by the dealer, be
equipped of several options such as:
hydraulic push-off system (HA), hydraulic push-off system with folding base (HAN),
removable inlay (IB) and several types of hydraulic valves to adjust the oil and the
pressure flow.
When your silage cutter is equipped with one or more of these options, for control
and precautionary measures of the concerning option we refer to the instructions in
the relevant paragraphs in this manual (see Table of contents).