AP Machinebouw B.V.
- 10 -
Manual AP silage cutter NP
WARNING:
If you want to take out feed from the floor, make sure the
tines or the closed bottom cannot grab in the ground or in
any other way can get stuck behind obstacles.
5
Carefully drive the AP silage cutter until the head tube / push-off system in
the stock of feed; push the tines / closed bottom downwards on the silage
to prevent possible bending of the tines or closed bottom,
WARNING:
It is very important that the cutting frame is always loaded
evenly, to avoid warping of the frame! With regard to this
follow the correct order during cutting of the blocks :
divide the width of the silage always in an uneven number
of blocks and keep the system in the cutting sequence as
indicated in image 4. In this image “A” stands for the
working width of the AP silage cutter and “B” for the width
of the AP silage cutter minus a certain distance!
6
Completely close the cutting frame of the silage cutter,
7
Tilt the AP silage cutter slightly back,
Image 3