![background image](http://html1.mh-extra.com/html/aoyue/int866/int866_instruction-manual_2951602013.webp)
13
AUTO SLEEP FUNCTIONS
AUTO-SLEEP MODE (Hot Air Gun)
The device has a built-in auto-sleep mode feature such that if the there
has been no user input from the hot air gun temperature adjustment button
for 30 minutes (default) the Hot Air Gun d remained , the device will switch
to sleep mode. The system will blow air (at room temperature) at maximum
rate in order to bring down the temperature. Once the temperature drops to
approximately 90°C, the Hot Air Gun will automatically stop and show an all-
dash “ - - - - “display indicating that the system is now on sleep mode.
CHANGING SLEEP MODE TIMER (HOT AIR GUN)
By default, the system has 30-minute countdown time before the hot air
gun goes to sleep mode. This can be altered by the following procedure.
1. While the hot air gun is on stand-by mode (“0FF” is displayed on the
panel “1” ), hold both UP and DOWN buttons of the HOT AIR GUN
TEMPERATURE adjustment buttons.
2. Wait until “t030” is displayed on the Hot Air Gun Temperature
display panel, “1”.
3. Release the buttons when “t030” appears.
4. Adjust the time using the same UP and DOWN buttons of the HOT
AIR GUN TEMPERATURE adjustment buttons.
5. Confirm the change by activating the HOT AIR GUN function switch.
6. The system will immediately switch back to operation and use the
defined countdown parameter for the entire usage.
NOTES:
●
The sleep mode timer is configurable between 1 and 30 minutes.
Sleep mode settings for Hot-Air gun and Soldering Iron are saved into the
memory and shall remain effective until it is res-et or new data is entered.
Summary of Contents for INT866
Page 19: ...19...