8
IMPORTANT REMINDERS:
1. Make sure the equipment is placed on a flat stable surface
and all the heat-generating components placed on their re-
spective holders or stands.
2. Ensure all function switches are OFF prior to reworking.
3. Ensure all terminal connections are properly secured.
IMPORTANT: Please refer to the CONTROL PANEL GUIDE page for
buttons and display panel directory.
A. INITIAL PROCEDURES
1. Plug the device to the main power source using the power cord
provided in the package.
2. With all function switches deactivated and all terminal connections
properly secured, switch ON the device by activating the main power
switch.
3. The display panels, B1 and B1 will temporarily show the product name
in a scrolling manner and then display “OFF” on all rows once the
scroll is finished. The system will remain at this state until the user
activates a function.
ASSEMBLY and PREPARATIONS
OPERATING GUIDELINES
(FOR Int 852A++ pro only)
Loosen the two screws that on the side
of the station.
Fasten the two
screws.
Align the vacuum pen holder
legs with the two screw holes.
9
OPERATING GUIDELINES
B. HOT AIR GUN
1. Follow the initial procedures above, “A. INITIAL PROCEDURES”.
2. Activate “Hot Air Gun” switch (“F” from the control panel).
3. The system will immediately start to blow air and increase the air
temperature according to the set values.
4. Adjust the air flow level using the airflow control buttons (“C3 and
C4” from the control panel).
5.
Adjust the hot air gun air temperature using the temperature
control buttons (“C1 and C2” from the control panel). The display
for Hot Air Gun Temperature will change from actual temperature
display to set temperature display while temperature is being
adjusted. When set temperature adjustment is done wait a few
seconds for the display B1 to return to displaying the actual
temperature.
6.
When reworking is complete, return the Hot Air Gun to its holder
and DO NOT immediately turn off the main power switch.
7.
Deactivate the Hot Air Gun Function button first in order to
activate the auto-cooling process. The system will start to blow
air (at room temperature) at a fast rate to reduce heat from the
hot air gun and bring down the temperature to a reasonable safe
level of 80°C. During this time, the display for hot air gun
temperature will also alternate from “Off” to actual temperature
display. Likewise, the air pressure level is at its highest reading as
indicated from the air flow gauge. Once the temperature drops to
approximately 80°C the system will halt and display “OFF” on the
panel. It is now safe to switch off the main power switch.
8.
Turn OFF the main power switch.
9.
Unplug the device from the main power source.
IMPORTANT:
When adjusting the air temperature, it is strongly advised
to initially increase the airflow level in order to
manage
the
system tem-
perature. This is to protect the heating element inside the handle from
excessive heat.
