aoyue INT 2703A+, Instruction Manual

Page: 18 / 32

18
AUTO SLEEP FUNCTIONS
G. Auto-Sleep Mode (Hot Air Gun)
The device has a built-in auto-sleep mode feature such that if the
Hot Air Gun sits on its handle and remained idle after a certain period
the prefix of the display for Hot Air Gun air temperature will also change
from “C” to “d”) , the device will switch to sleep mode. This mechanism
is triggered by a countdown timer. When the timer has elapsed, the
system will blow air (at room temperature) at maximum rate in order to
bring down the temperature. During this time, the Hot Air Gun air level
display will change to “cool”. Once the temperature drops to
approximately 90°C, the Hot Air Gun will automatically stop and show
four dashes “ - - - - “ indicating that the system is now in sleep mode.
To reactivate the hot air gun simply press pick up the hot air gun from
its dock.
Changing SLEEP Mode Timer (HOT AIR GUN)
By default, the system has 15-minute countdown time before the
hot air gun goes to sleep mode. This can be altered by the following
procedure.
1. While the hot air gun is on stand-by mode (“0FF” is displayed on
the panels “18” and “16”), Press and hold the UP button of the
HOT AIR GUN AIRFLOW adjustment button(“3” control panel) .
2. Wait until “015d” is displayed on the Hot Air Gun Temperature
display panel, “18”.
3. Release the button when “005d” appears.
4. Adjust the time using the UP and DOWN buttons of the HOT AIR
GUN TEMPERATURE adjustment buttons (“2” control panel).
5. Confirm the change by pressing and holding the DOWN button of
the HOT AIR GUN AIRFLOW adjustment button. (“3” from control
panel guide)
6. The system will switch back to displaying “OFF” indicating the
new sleep timer is saved into the system.