49
Fig.5-3-3: Control panel
1. JOB No. Indicator
For retrieving parameter records/job numbers that were previously saved with the
“Store” button.
2. Welding speed indicator
When the light is on, the welding speed (cm/min) is on the right display.
3. Welding voltage indicator
When the light is on, the preset or actual welding voltage is on the right display.
4. Arc-length correction indicators
For correcting the arc length, when the light is on, the right display shows the arc length
value.
- shorter arc length
0 neutral arc length
+ longer arc length
5. Inner temperature indicators
This is reserved function, cannot operate right now.
6. Peak current/ Inductance
For adjusting the peak current during the P-MIG/MAG welding process, values range
(-5.0-+5.0).
- shorter arc length
0 neutral arc length
+ longer arc length
For synergic MIG, change the inductance when short circuiting transfer (-5.0-+5.0).
- harder, stable arc
0 neutral arc
+ soft, low spatter arc