48
For connecting with the output terminal (+) of power source via welding cable
10.Overload protector
Used for overload protection of wire feeder.
11.Water inlet
For connecting water inlet of water cooling machine(blue).
12.Water outlet
For connecting water outlet of water cooling machine(red).
5-3 Control panel
There are two options for the control panel: digital and analog. The digital is more
intuitive to use and the analog is simple to operate.
Fig. 5-3-1: digital type
Fig. 5-3-2: Analog type
Note!
Some described parameters in this manual may be slightly different
from the wire feeder, some identification may be slightly different from power
source identification, but the manner of working is the same.
Warning!
Operating the equipment incorrectly can cause serious injury and
damage. Do not use the functions described here until you have read and
completely understood all content of this manual.
Digital type control panel
The functions on the control panels are all arranged in a very logical way. The various
modes and parameters needed for welding are easy to select by pressing the
appropriate button; parameters are easy to be adjusted by rotating encoder. Synergic
adjustment makes the complicated operation much easier.