22
situation, and may be up to 79V, so as to get ideal arcing characteristic.
(14) Arc-length correction parameter
For correcting the arc length (-5.0-+5.0) by adjustment knob (1) when indicator is on, the
right display shows the arc length value when the indicator lights up.
- shorter arc length
0 neutral arc length
+ longer arc length
Important!
The range (-5.0-+5.0) means that, when preset welding current, the arc
length value is -50
％～
+50
％
of the corresponding welding voltage.
(15) Temperature Indicator
This is reserved function, cannot operate right now.
(16) Peak current/Inductance parameter
For adjusting the peak current during the P-MIG/MAG welding process, values range
(-5.0-+5.0)
- shorter arc length
0 neutral arc length
+ longer arc length
For synergic MIG, the inductance value when changing short circuiting transfer
(-5.0-+5.0).
- harder, stable arc
0 neutral arc
+ soft, low spatter arc
In electrode (MMA) welding mode, for influencing the short-circuiting amperage at the
instant of droplet transfer
0 soft, low-spatter arc
100 harder, more stable arc
(17) Wire feeding speed indicator
When the indicator is on, the left display shows the wire feeding speed (M/min), when
adjust this button, the relevant parameters will change automatically
(18) Welding current indicator
When the indicator is on, the left display shows the preset or real welding current values
(19) Sheet thickness indicator
When the indicator is on, the left display shows the preset sheet thickness (mm). The
relevant parameters will change automatically when this value is changed.
(20) “a” dimension indicator
When the indicator is on, the left display shows “a” dimension (mm). Wire speed and