7.1 Front Panel
{figure 1}
7.1.1 Power Switch
Press this switch to power the radio on/off. In addition the separate infrared remote
controller (supplied) will enable the AR7000 to be switched off. Note: The AR7000
may be switched off and on via the
infrared remote
only if the AR7000 mechanical
front panel switch remains depressed.
7.1.2 Headphone Socket
A 3.5mm headphone jack plug can be connected for personal monitoring. When
connected, the built-in speaker will be disconnected (audio automatically cut off).
7.1.3 LCD Display
A built-in 3.1" DSTN type NTSC colour LCD (Liquid Crystal Display) shows operating
conditions.
7.1.4 Keypad
Press the keys to enter necessary data/information into the receiver. Some particular
keys are assigned with dual functions, press and hold for more than one second to
access the dual function. Only valid key(s) will be accepted.
Primary function “PUSH” - orange lettering,
quick tap
only required.
Secondary function “PRESS” (and HOLD) - white lettering,
hold for more than one
second
.
Many functions are also available from the infrared controller.
7.1.5 Main Dial
Rotate the main dial to select the receive frequency. This dial is also used to select
various receiver parameters via menus.
7.1.6 Infrared receive window
Point the infrared hand controller at this front panel window when the receiver is
operated via the infrared hand controller.
7.2 Rear Panel
