74
3. Rotate the sub dial to toggle between OFF, ALL, or to select the inversion frequency from the range of
60 Hz ~ 254.1 Hz as from the list below. To set CTCSS to ALL, you can also press the [
PASS
] key.
CTCSS frequencies (in Hz)
4. Press the [
MHz
] key to accept the entry and return to a standard display.
Alternatively, press the [
CLR
] key to abort entry, or press the [
DOWN
] key to move to the next item
on the configuration menu.
10-10 DCS (DIGITAL CODED SQUELCH
)
DCS function is used to decode a selected digital code that uses 23 bit code data sent lower than the voice
frequency. The data speed is 134.3 bit/sec in NRZ (Non-Return-Zero) format FM modulation.
Note: This function operates only in the NFM mode with a frequency of 25 MHz or higher.
To activate the function, perform the following steps:
1. Press the [
FUNC
] key, and then press the [
0
] key.
2. Press the [
DOWN
] key several times to select “DCS” in reverse contrast.
3. Rotate the sub dial to toggle between OFF, ALL or to select the DCS code from the list below.
To set DCS to ALL, you can alternatively press the [
PASS
] key.
60.0
67.0
69.3
71.9
74.4
77.0
79.7
82.5
85.4
88.5
91.5
94.8
97.4
100.0 103.5
107.2 110.9
114.8 118.8 120.0
123.0 127.3
131.8 136.5 141.3
146.2 151.4
156.7 159.8 162.2
165.5 167.9
171.3 173.8 177.3
179.9 183.5
186.2 189.9 192.8
196.6 199.5
203.5 206.5 210.7
218.1 225.7
229.1 233.6 241.8
250.3 254.1
ALL
Summary of Contents for AR6000
Page 1: ... AR6000 Super Wide band Multi mode Receiver Operating manual AOR LTD ...
Page 91: ...90 13 SPECIFICATIONS ...
Page 94: ...93 ...