AOR AR6000, Operating Manual, Page: 48 / 95

47
5. To delete all selected scan channels, press the [ PASS ] key. To cancel, press the [ CLR ] key.
6. Press the [ MHz ] key to exit from this menu.
7-5-3 STARTING / STOPPING SELECT SCAN
To start select scan, you must first have at least two memory channels tagged for select scan.
Press the [ FUNC] key, and then press the [ 4 ] key to start select scan.
The direction of the scan can be reversed using the sub dial.
To stop select scan, press the [ VFO ] key.
7-6 LOCKING OUT UNWANTED ACTIVE MEMORY CHANNELS (PASS)
It is possible to lock out (PASS) unwanted memory channels while in scan mode. This is useful to eliminate
unwanted permanent transmissions. It is important to understand the PASS function before taking action
or transmissions may be missed.
In memory read mode or while stopped on an unwanted frequency, press the [ PASS ] key.
Pressing the [ PASS ] key again on the same memory channel will de-select pass channel.
The scan process will resume. It will appear that all channels are still scanned, however, locked out
channels will be ‘skipped’, the scan will not stop on locked out channels.