AODELAN E3+, Manual

Page: 26 / 56

24
When the recycling of all the flash units is completed, the master units’
charge lamp lights on.
1.6 Check the operation: Press the master unit’s test flash button (charge
lamp). The slave unit flash will fire. If not, check that it is placed within the
operation range.
1.7 Take the picture: Set the camera and take the picture, in the same way
as with normal flash shooting. If a standard flash exposure was obtained,
the flash exposure confirmation lamp lights up (blue) for 2 sec.
2. Autoflash Shooting Using Multiple Slave Unit
When you need more flash output or you want to perform lighting more
easily, you can increase the number of slave units and fire them as a single
flash. To add slave units, use the same procedure as “ Autoflash Shooting
Using One Slave Unit”. Set A, B or C as the firing group. The flash will not
fire if it is set to D or E. When the number of the slave units is increased,
automatic control is performed to fire all flashes at the same flash output and
ensure that the total flash output results in standard exposure.
Using Fully Automatic Wireless Flash
Flash exposure compensation and other settings set on the E3
+
transmitter
(master unit) will be automatically set in the flash (slave). You don’t need to
operate the slave unit.