AODELAN E3+, Manual

Page: 36 / 56

34
1. Press master unit’s < >button to set the flash mode to< >.
2. Set the number of firing groups and flash output for each group by
referring to manual flash on the preceding page.
3. Set the flash frequency and number of flashes:
When is displayed, press function button 2 corresponding to ,
turn< > to set the number of flashes and press < >button;
Press function button 3 corresponding to , turn < > to set the flash
frequency and press < >button.
Note:
1) High speed sync function is not available when using stroboscopic
flash.
2) E3
+
receiver does not support MULTI mode.