AODELAN E3+, Manual

Page: 25 / 56

23
ETTL: Fully Automatic Wireless Flash Shooting
E3
+
transmitter attached to the camera (master) and a wirelessly controlled
flash (slave) can perform fully automatic wireless shooting.
1. Autoflash Shooting Using One Slave Unit
1.1 Set the flash as the slave unit: For the slave unit setting, see the flash
or the E3
+
receiver’s instruction manual. Set A, B or C as the firing group. If
set to D or E, the flash does not fire.
1.2 Check the channel and ID: If the channels and IDs of the master unit
and slave unit are different, set them to exactly the same number.
1.3 Position the camera and the slave unit within the range of wireless
radio transmission.
1.4 Set the flash mode to < >: Press the < > button on master
and set the flash mode to < >.The slave unit is set automatically
to< > during shooting via the control form the master unit. For
slave units that use E3
+
receiver, flashes on the receiver need not to set
to wireless slave mode, but the need to be set to ETTL mode manually
before shooting.
1.5 Check the transmission status and that the flash is ready:
Check that the < >lamp lights green;
When the flash that is set to wireless slave mode is ready, the AF-
assist beam emitter blinks at 1-second intervals;
Check that the < > slave flash-ready icon is lit on the master unit’s
LCD panel;