-BL287*B02F*CC20 14/16-
①
②
IN
OUT
LINK
ALM
OUT
IN
BL287SB-02F-CC20
BL287SB-02FS-CC20
BL287PB-02F-CC20
BL287PB-02FS-CC20
BL287XB-02F-CC20
BL287XB-02FS-CC20
DP (Red)
DN (Black)
24V (Green)
0V (White)
DP (Red)
DN (Black)
24V (Green)
0V (White)
4
AWG23
φ
1.4mm
4
AWG23
φ
1.4mm
7.5
200
200
IN
OUT
LINK
ALM
OUT
38
17
IN
■
Individual specifications
Number of
occupied points
Detection
function
Slave unit voltage drop (DP-DN voltage drop)
I/O power supply drop (24V-0V voltage drop)
Weight
Response time
*
4
1ms max.
[Outside Dimensions]
■
Transmission specifications
*
4 Indicates the internal processing time of this unit. The maximum transmission delay
time is defined as “this time + bit transmission cycle time × 2.”
*
5 Current consumption for input is a value assumed when all IN-0V pins (NPN) or
24V-IN pins (PNP) are short-circuited. To connect a 3-wire type sensor, add a total
current consumption of the sensor.
Current consumption for output is a value assumed when all points are turned ON.
Add a total current consumption of load being connected.
②
I/O side
①
Transmission side
■
Specifications of the cable included in ASLINKER
Number of
core wires Core wire size
Signal name
Core wire sheath
outer diameter
Number of
core wires
Core wire size
Signal name
Core wire sheath
outer diameter
Operating ambient temperature/humidity
Storing ambient temperature/humidity
Vibration resistance
Shock resistance
Atmosphere
Operating altitude
*
1
Pollution level
*
2
■
General specifications
0 – +55°C, 10 – 90%RH No condensation
-25 – +75°C, 10 – 90%RH No condensation
Based on JIS B 3502 and IEC 61131-2
Based on JIS B 3502 and IEC 61131-2
No corrosive gas
0 – 2000m
2 or less
*
1 Do not use or store AnyWireASLINK devices in an environment where the pressure exceeds
the atmospheric pressure at an altitude of 0 meters. Doing so may result in malfunction.
*
2 “Pollution level” is an index that indicates the degree of occurrence of conductive substances
in the environment where the device is used.
Pollution level 2 means the occurrence of only pollution by non-conductive substances.
In such an environment, however, electrical conduction could occur due to accidental
condensation.
NPN bit input: 2 points
NPN bit input: 1 point/
bit output: 1 point
NPN bit output: 2 points
PNP bit input: 2 points
PNP bit input: 1 point/
bit output: 1 point
PNP bit output: 2 points
Transmission
side
(DP-DN)
Current
consumption
Service power supply voltage
Transmission method
Synchronization method
Transmission procedure
Connection mode
Number of
connection points
*
3
Number of connection units
RAS function
24V DC +15% to -10% (21.6 to 27.6V DC)
with a ripple of 0.5Vp-p or less
DC power supply superimposed
total frame/cyclic method
Frame/bit synchronization method
AnyWireASLINK protocol
Bus type (Multi-drop method, T-branch
method, Tree branch method)
Number of bit points: 512 points max.
(Input: 256 bits, Output: 256 bits)
Number of word points: 1024 words max.
(Input: 512 words, Output: 512 words)
Up to 128 units
Detection of transmission line disconnection,
transmission line short-circuit, transmission
power supply drop, and
duplicated/unregistered ID
*
3 The number differs depending on the master unit. Be sure to refer to the manual of the
master unit for the number.
Model
UL style 20276
4-wire × AWG23
φ
4.6, gray
UL style 2844
3-wire × AWG26
φ
3.1, black
UL style 2844
2-wire × AWG26
φ
3.1, black
Unit: mm
18g
2
AWG26
φ
1.0mm
3
2
3
AWG26
φ
1.0mm
2
3
*
This figure shows an example of
the I/O-mixed type terminal.
[Specifications]
BL287SB-02F-CC20
BL287XB-02F-CC20
BL287PB-02F-CC20
BL287SB-02FS-CC20
BL287XB-02FS-CC20
BL287PB-02FS-CC20
3.4mA
3.5mA
3.8mA
3.4mA
3.6mA
3.8mA
11.2mA
8.0mA
4.7mA
11.2mA
8.0mA
4.7mA
I/O side
*
5
(24V-0V)
BL287SB-02F-CC20
BL287XB-02F-CC20
BL287PB-02F-CC20
BL287SB-02FS-CC20
BL287XB-02FS-CC20
BL287PB-02FS-CC20
IN(Black), 24V(Brown),
0V(Blue)
IN(Black), 24V(Brown), 0V(Blue)
OUT(Black), 24V(Brown)
OUT(Black), 0V(Blue)
OUT(Black), 24V(Brown)
IN(Black), 24V(Brown), 0V(Blue)
OUT(Black), 0V(Blue)
*
The figure shows an example of BL287XB.
