Anywire B2G78-PN1, User Manual

Page: 33 / 58

I/O data
5-7
5.1.7. I-address/Q-address assignment
In SIEMENS PLC I-address and Q-address settings, b8 to b15 of ASLINK bit positions are assigned
before b0 to b7.
ASLINK bit position
b15 b14 b13 b12 b11 b10 b9 b8 b7 b6 b5 b4 b3 b2 b1 b0
Example) When “Bit-input Ad. 0-63” is I-address “68…75”, as shown below
Bit-input Ad.0-63
b15 b14 b13 b12 b11 b10 b9 b8 b7 b6 b5 b4 b3 b2 b1 b0
%IW68
%IB68 %IB69
%I68.7 %I68.6 %I68.5 %I68.4 %I68.3 %I68.2 %I68.1 %I68.0 %I69.7 %I69.6 %I69.5 %I69.4 %I69.3 %I69.2 %I69.1 %I69.0
%IW70
%IB70 %IB71
%I70.7 %I70.6 %I70.5 %I70.4 %I70.3 %I70.2 %I70.1 %I70.0 %I71.7 %I71.6 %I71.5 %I71.4 %I71.3 %I71.2 %I71.1 %I71.0
%IW72
%IB72 %IB73
%I72.7 %I72.6 %I72.5 %I72.4 %I72.3 %I72.2 %I72.1 %I72.0 %I73.7 %I73.6 %I73.5 %I73.4 %I73.3 %I73.2 %I73.1 %I73.0
%IW74
%IB74 %IB75
%I74.7 %I74.6 %I74.5 %I74.4 %I74.3 %I74.2 %I74.1 %I74.0 %I75.7 %I75.6 %I75.5 %I75.4 %I75.3 %I75.2 %I75.1 %I75.0
Acc
ordingly, when “Switch0” tag is attached to ASLINK bit input address “0”, and “Switch63” tag is
attached to ASLINK bit input address “63”, these settings are as follows: