background image

Precautions 

 

 

Precautions related to this user’s manual 

1. 

The customer is kindly requested to see to it that this user’s manual reaches the end user. 

2. 

Read this user’s manual thoroughly and understand the descriptions, and then operate this product. 

3. 

This user’s manual is intended to describe the details of the functions provided in this product and not to 

guarantee that this product serves the specific purposes the customer aims at. 

4.  Rep

roduction or duplication of part or all of this user’s manual without permission is prohibited. 

5. 

Contents of this user’s manual may be subject to future changes without prior notice. 

 

 Safety precautions

 (Make sure to read before use) 

When using this product, please carefully read this Manual and the related Manuals introduced in this 

Manual and pay sufficient attention to safety in order to handle this product properly. 

The precautions in this Manual describe only matters related to this product. 

For safety precautions as a system, refer to User

’s Manuals for controllers, such as the CPU unit. 

“Safety precautions” ranks the safety precaution items into “

  WARNING

” and “

  CAUTION.

” 

 

 

 

In addition, 

Matters described in 

  CAUTION may lead to serious consequences depending on the situation. 

All describe important contents, therefore, make sure to observe the cautions and warnings. 

Carefully store this Manual so as to access it whenever necessary, and deliver this Manual to the end user. 

 
 
 

[Application of the product] 

 

  Application of the AnyWire system is limited to areas in which any failure and/or problem of the 

product shall not result in serious consequences and in systems with fail-safe and backup functions 

are provided externally. 

  The AnyWire system is designed for applications in general industrial purposes and does not come 

with control features designed for mission critical purposes. 

Therefore, the product is not applicable in areas like medical equipment, nuclear power plants, 

railroad, aviation, safety devices, in which extreme safety is the priority. 

 
 

WARNING 

 

Improper handling may cause a dangerous situation and can result 
in death or serious injury.

 

 

 

 

Improper handling may cause a dangerous situation and can result 
in moderate injury or minor injury or is assumed to result in property 
damage only.

 

 

WARNING 

CAUTION

 

Summary of Contents for B2G78-PN1



























































Reviews: