Switch setting
3-1
3. Switch setting
3.1 Transmission I/O setting switches
These switches are used to set the number of transmission points for the AnyWireASLINK system.*
Ensure to shut down the power before the setting.
MODE switch
Number of bits
1
2
3
4
ON
ON
OFF
OFF
32 inputs, 32 outputs
OFF
ON
OFF
OFF
64 inputs, 64 outputs
ON
OFF
OFF
OFF
128 inputs, 128 outputs
OFF
OFF
OFF
OFF
256 inputs, 256 outputs
(Factory setting)
* Do not set a switch other than those listed in the above table.
3.2 SET switch
This switch is used to clear error flags and perform the automatic address recognition.
(1) Clearing error flags
Press the SET switch to clear error flags.
Operation of this switch is the same as that of the “Error flag clear” command output.
P. 5-5
(2) Automatic address recognition
If you keep pressing the SET switch for approx. 2 seconds or longer, the “SET” LED lights, and
automatic address recognition will start.
P. 6-1
Summary of Contents for B2G78-PN1
Page 34: ...I O data 5 8 Input output data...
