ANYTEC 2018 A27, Owner'S Manual

Page: 12 / 84

1. INTRODUCTION __PAGE 4
wind with a danger of unusual waves and gusts. These are dangerous conditions that
necessitate a skilled and fit crew and a well-maintained boat.
If your craft is equipped with a life raft, study its instructions carefully. The boat must be
equipped with the appropriate safety equipment (life vests, safety harnesses, etc.) as
required for the boat type and the weather conditions. In some countries, this
equipment is compulsory. The crew must be familiar with the correct use and operation
of all safety equipment and be able to handle the boat in emergencies (including rescuing
a person who has fallen overboard, towing, etc.). Yachting schools and clubs arrange
rescue training and practice opportunities on a regular basis. Everyone aboard the craft
should wear a suitable personal flotation device (life vest or boating vest). Please note
that in some countries national boating regulations may require everyone aboard to
wear a personal flotation device whenever on board.
Finally, please pay respect to the environment by complying with good practice as well as
local, national and international (Marpol) regulations. Thank you!
Please retain this manual and provide it to the boat's next owner if you sell your
boat.
1.2 G
ENERAL DESCRIPTION
The boat is primarily intended for private and leisure use. The boat has an open bow and
stern deck, and amid ship cabin. It is a single hull type boat design entirely made of
aluminum, so are the handrails and cleats. The boat is designed and built according to
standards for CE approval in category C and is designed to be propelled by a single
outboard engine.
1.3 C
RAFT IDENTIFICATION NUMBER
(CIN)
The Craft Identification Number is located on the starboard side of the transom. The
CIN must be included in all correspondence related to the boat, such as when buying
parts.
1. CIN Location
Anytec 747CAB Owner's Manual English V9.pdf 12 1/18/2018 7:37:25 PM Anytec 747CAB Owner's Manual English V9.pdf 12 1/18/2018 7:38:24 PM