- 35 -
7.2 GFMT and NFMT Print Format Input
Setting of GFMT and NFMT is as follow :
F1
Config
F2
Format
F3
Calibration
F8.1
GFMT
F4
Serial
F5
Mode
F6
Relay
F8.2
NFMT
F7
Ver
F8
PFormat
Display first 6
characters of
format
Display and edit
active character and
ASCII value
Delete active
character
Same as GFMT
F8.3
Default
Press Enter to
Load Default Format
(1)
Set indicator to Configuration mode (display shows “F 1”)
(2) Press to show “F 8” (see Fig. 7-1). Press
to Print Format Menu and
display shows “F 8.1”.
(3)
When display shows “F 8.1”, press
again and display shows the first 6 digits of
GFMT format.
(4) Use
，
to move the cursor to different flashing digits. When it is at the far
right position, press
again, the first digit at the left is removed and another digit
prompts up at the right. When it is at the far left position, press
, the last digit
at the right is removed and another digit prompts up at the left. Press
to add
a space to the left of the flashing digit.
Press
to insert a
space before the
active character
Scroll left in format string
Scroll right in format string
Decrement ASCII value of
active character
Increment ASCII value of
active character
Fig. 7-1 Print Format Input Flow Diagram
