Anybus CompactCom 40 EtherCAT, Network Manual, Page: 41 / 138

Anybus Module Objects 39 (136)
Instance Attributes (Instance #3, IP Address)
Value is used after module reset.
# Name Access Data Type Description
1 Name Get Array of
CHAR “IP address”
(Multilingual, see
Multilingual Strings, p. 42
2 Data type Get UINT8 04h (= UINT8)
3 Number of elements Get UINT8 04h (four elements)
4 Descriptor Get UINT8 07h (read/write/shared access)
5 Value Get/Set Array of
UINT8 Valid range: 0.0.0.0 - 255.255.255.255 (Default =0.0.0.0)
This attribute should not be set by the application at every power on, as this would cause
certification problems.
Instance Attributes (Instance #4, Subnet Mask)
Value is used after module reset.
# Name Access Data Type Description
1 Name Get Array of
CHAR “Subnet mask”
(Multilingual, see
Multilingual Strings, p. 42
2 Data type Get UINT8 04h (= UINT8)
3 Number of elements Get UINT8 04h (four elements)
4 Descriptor Get UINT8 07h (read/write/shared access)
5 Value Get/Set Array of
UINT8 Valid range: 0.0.0.0 - 255.255.255.255 (Default =0.0.0.0)
This attribute should not be set by the application at every power on, as this would cause
certification problems.
Instance Attributes (Instance #5, Gateway)
Value is used after module reset.
# Name Access Data Type Description
1 Name Get Array of
CHAR “Gateway”
(Multilingual, see
Multilingual Strings, p. 42
2 Data type Get UINT8 04h (= UINT8)
3 Number of elements Get UINT8 04h (four elements)
4 Descriptor Get UINT8 07h (read/write/shared access)
5 Value Get/Set Array of
UINT8
Valid range: 0.0.0.0 - 255.255.255.255 (Default =0.0.0.0)
This attribute should not be set by the application at every power on, as this would cause
certification problems.
Anybus ® CompactCom ™ 40 EtherCAT ® Network Guide SCM-1202-034 1.1