Anviz OA1000 Mercury, User Manual

Page: 46 / 101

User Manual
39
Default Verification Mode on the Device: The default mode of verification from device.
The following are the modes:
Click the button [OK] to save the settings. Following message box pops up:
Click the button [OK] to confirm or click the button [Cancel] to cancel.
The operation information in the main interface is as follows:
Click the button [Display default setting]
to see the terminal‘s default settings
4.1.8 Ring Settings
Set the ring time. Please enable the Ring function in the parameter settings first of all.
Click the button [Ring settings]. [Set ring time] window pops up as follows:
Input the ring time and then click the button [+
Add)] to add the ring time to the ―Ring time
li
st‖.
You can also click the button [-
Delete] to delete the ring time from the ―Ring time list‖.
One message box pops up as follows:
Click the button [OK] to confirm or click the button [Cancel] to cancel.
Click the button [OK] to save the settings. Following operation information displays in the
main interface:
[2009-06-17 16:18:56]Set Advanced Parameter...
[2009-06-17 16:18:58]1[Head Office]Parameter setting Successful!