Antx Messenger 600, User Manual

Page: 30 / 40

30
Parameters for Analog Channel Configuration
(channel numbers 51-300 are pre-defined analog channels)
Parameter
Code
Reference Description Default
16 Alarm
Output
A digital output channel that can be
activated when this channel goes into
alarm (referenced as channel number).
Disabled
[0]
0 = disabled
xxx = any MODBUS channel
configured as a Write Coil channel
Channel numbers 301-900 are user configurable MODBUS
channels. The following parameters are specific to those channels
when configured as type analog.
20 Slave ID Modbus ID of slave unit -1
Range -1 to 255
-1,0 = disabled
1-227 = for direct connect slave devices
228-239 = reserved
240-255 = for peer to peer devices
21 Register
Number
Register number in slave to read/write 1
Range 1 – 65535
22 Modbus
Function
Code
Defines the type of data register to
read/write in the slave.
NOTE: A single register is 2-bytes (16-
bit), a double register is 4-bytes (32-bit)
None [0]