Antx Messenger 600, User Manual

Page: 16 / 40

16
6 Debug Menu
The debug menu is a text based menu system accessible via terminal emulation
software running on a PC (i.e. TeraTerm or Hyperterminal) or via a PC based utility
that connects to the Messenger OTA via TCP. Debug menus allow the user to view or
change configuration parameters, view data values and history logs, see
communications between CPU and attached peripherals, and to clear accumulated data
values or logs.
The Debug Menu can be accessed via a direct serial RS232 connection. The default
port settings are: 9600 baud, 8 databits, 1 stop bit, no parity
NOTE: Once connected, press the ‘Enter’ key to see the Main Menu (example below).
________MessengerAB________
Site Name: Site Name
Model : CP750/ANTX LVW3 MBUS J1939
Version : AB v8.1.8D 02/26/20
Date/Time: 05/13/20 14:34:09
Asset ID : 357766090587705
GPRS Reg : Home
Server : Primary
MSISDN : 15772170946
Local IP : 10.208.242.239
Network : LTE
CELL RSSI: 16 (18,15)
GPS : No Fix
DataQue : 9
PushQue : 0
Output 1 : Off
Output 2 : Off
Output 5 : Off
1) View Config
2) Timers
3) Data
4) Events
5) Reports
6) Setup
7) Maint
8) J1939 Diags
Cmd =>
Most menu navigation commands are single alpha-numeric entries, no carriage return
(Enter) required. However, when modifying configuration parameters, the
configuration string entered must be followed by a carriage return (Enter).