EGG STATION DUAL ZONE
9
P/N 1011416 Rev. H 02/18
McDonald’s
PROGRAMMING
Turning cooking surfaces on or off
Press and hold the
Program
button for 5 seconds until the
unit beeps. Both displays show ON.
• To turn the front cooking surface off, press the
Down
arrow button.
• To turn the rear cooking surface off, press the
Up
arrow button.
You cannot turn both cooking surfaces off at the same
time. For example, if the rear surface is off and you try to
turn the front surface off, the rear will turn on.
NOTE: This setting is not saved. When the unit is pow-
ered off and powered back on, both cooking surfaces
are set to on.
Manager Mode
Manager mode allows access to view and change the pro-
gramming. This includes:
• Adjust Timers
• Adjust Rear Setpoint Temperature
• Adjust Front Setpoint Temperature
• Language Selection (FR-C/En)
• Adjust Temperature Units (
°
F/
°
C)
• Adjust Beeper (three volume levels)
• View Elapsed Usage Time
• View Errors
• View Internal Control Board Temperature
• View power line information
To enter manager mode:
1. Press and hold the
Program
button for approximate-
ly 5 seconds until the unit beeps. Release the but-
ton. Then, press and hold the
Program
button again
for approximately 10 seconds until the unit beeps.
2. The unit enters manager mode at the
Adjust Timers
option. Press the desired timer to change and use
the
Up
and
Down
arrow buttons to change the time
as desired. Press the
Program
button to save the
change. The unit moves to the next option which is
Adjust Rear Setpoint Temperature
.
3. Use the
Up
and
Down
arrow buttons to change the
Rear setpoint temperature as desired. The default
is 275° F. Press the
Program
button to save the
change. The unit moves to the next option which is
the
Adjust Front Setpoint Temperature
.
4. Use the
Up
and
Down
arrow buttons to change
the Front setpoint temperature as desired. The
default is 275° F. Press the
Program
button to save
the change. The unit moves to the next option,
Language Selection
.
5. To change the language between English and
French Canadian, press the
Down
arrow button for
French Canadian (FR-C). Press the
Up
arrow but-
ton for English (En). Press the
Program
button to
save the change. The unit moves to the next option,
Adjust Temperature Units
.
6. Use the
Up
and
Down
arrow buttons to change
the unit between Fahrenheit and Celsius. Press the
Program
button to save the change. The unit moves
to the next option,
Adjust Beeper
.
7. Use the
Up
and
Down
arrow buttons to change the
beeper setting. There are three options with variable
volumes and sound. Press the
Program
button to
save the change. The unit moves to the next option,
View Elapsed Time
.
8. The
View Elapsed Usage Time
option shows the
total time of unit operation. This option cannot be
edited. Press the
Program
button to move to the
next option,
View Errors
.
9. The
View Errors
option shows any errors that have
occurred. This option cannot be edited. Press the
Program
button to move to the next option,
View
Internal Control Board Temperature
.
10. The
View Internal Control Board Temperature
shows the current ambient temperature of the con-
trol board. This option cannot be edited. Press the
Program
button to move to the next option,
View
Power Line Information
.
11. The
View Power Line Information
option shows
power usage information. This option cannot be
edited. Press the
Program
button to return to the
Adjust Timers
option. From here, you can select
another timer to adjust or wait for 10 seconds for the
unit to return to operation mode.
Factory Default Cooking Times
The factory default cooking times are listed below per
button name:
•
Round
- 2 minutes 30 seconds
•
Folded
- 2 minutes
•
Timer 3
- 30 seconds
•
Timer 4
- 30 seconds
