Antunes Egg Station Dual Zone ESDZ-1200 Series, Manual

Page: 6 / 20

EGG STATION DUAL ZONE
6
P/N 1011416 Rev. H 02/18
McDonald’s
OPERATION
Preparing Unit
1. Place Egg Rings into Egg Racks.
2. Vertically place the pins of the Egg Racks into the
slots on the Hinge Bracket.
3. Check to see that all Egg Rings are seated flat on
the Grill Surface.
4. Ensure that the Egg Racks and Top Covers are in
the down position during warm-up and when not
loading or removing eggs.
5. Slide the Scrap Pans into place on both sides of
the unit.
6. Turn the power on.
7. Allow the unit to preheat until the displays show
USE .
NOTE: The displays show HEAT while the unit is
warming up. The display shows USE when it is
ready for use. When the unit is turned off, the dis-
plays show HOT until the cooking surface tempera-
ture drops below 145
°
F, then the displays go blank.
Control Panel
The unit is designed with two separate cooking surfac-
es controlled by an integrated two-timer system.
Refer to Figure 3 to familiarize yourself with the control
interface.
The front cooking surface is controlled by the Front
Display and Controls. The rear cooking surface is con-
trolled by the Rear Display and Controls.
The
Up
and
Down
arrow buttons work for both the front
and rear controls.
The Program button provides access to unit settings.
The Power button turns the unit on and off. When the
unit is turned on, the displays show programming infor-
mation including the setpoint temperature of the front
and rear cooking surfaces (275
°
F). The unit begins to
heat up. The displays show HEAT during warm up. The
displays USE when the related cooking surface is up
to cooking temperature. When the unit is turned off, the
displays flash HOT and OFF until the cooking surfaces
drop below 145
°
F, then the displays go blank.
Figure 3. Operating Controls
A. J. ANTUNES & CO
ROUND FOLDED TIME 3 TIME 4
ROUND FOLDED TIME 3 TIME 4
Power
Button
Program
Button
Rear Display
and Controls
Front Display
and Controls
Down Arrow
Button
Up Arrow
Button
When the unit is turned on, you can view the current
cooking surface temperature by pressing the Up arrow
button for the rear of the unit or pressing the Down
arrow button for the front of the unit.
Each timer row has its own display and four cooking
buttons:
• Round - For cooking round eggs
(Default setting is 2 minutes 30 seconds)
• Folded - For cooking folded eggs
(Default setting is 2 minutes)
• Time 3 - Can be programmed as desired
(Default setting is 30 seconds)
• Time 4 - Can be programmed as desired
(Default setting is 30 seconds)
You can add labels for the Time 3 and Time 4 buttons
by removing the label bracket and screw as shown
below. Affix the labels to the bracket and reinstall.
LANGUAGE SELECTION
To change the language from English to French
Canadian, refer to Language Selection within the
section titled Manager Mode in this manual.
Label Bracket
Label
Bracket
Screw