Video Input
BNC Connector used to accept Video reference. When active the OCX HD will lock to the sample rate
of the incoming video signal.
10M Atomic Clock Input
This BNC Input Connector allows the OCX HD to receive timing reference from an Atomic Clock, such
as the Antelope 10M and 10MX, to increase the Oscillator accuracy.
If the device is in Oven mode, plugging in the atomic clock causes the “Atomic LED” light to illuminate
on the device front panel and the atomic device becomes the primary timing reference.
S/PDIF Inputs
These two inputs can receive S/PDIF clocking reference up to 192 kHz.
AES/EBU Input
This input can receive AES/EBU clocking reference up to 192kHz.
Word Clock Outputs
Ten Word Clock Outputs on BNC connectors.
AES/EBU Outputs
These four outputs provide AES/EBU clock at sample rates up to 192kHz. Note that if the OCX HD is
working at a higher sample rate than the receiving device, the Word Clock signal cannot be output
via this AES/EBU connector.
S/PDIF Outputs
These four outputs provide AES/EBU clock at sample rates up to 192kHz. Note that if the OCX HD is
working at a higher sample rate, the Word Clock signal cannot be output via this S/PDIF connector.
USB Type B Connector
Allows connection to PC and Mac for the Control Panel application and firmware updates.
OCX HD User Manual
7
