Power Switch
Toggles standby / operation state. When the device is powered on
,
an illuminated ring will
glow around the power button.
Oven Clock Light
When lit, this indicates OCX HD is clocked by its internal oven-controlled crystal oscillator.
LOCK Indicator
When lit, this indicates OCX HD is locked to a signal that enters through the WC, Video,
S/PDIF or AES/EBU inputs.
Atomic LOCK Indicator
When lit, this indicates OCX HD is locked to an atomic signal that enters through the 10M
input on the rear panel. This overrides the Oven Clock lock light as soon as it is plugged in
and the Oven Clock lock light will automatically go off.
Clock Source Selection Knob
This selector allows you to select the current Clock Source for the OCX HD. 'Oven' is for the
internal clock, the rest of the options are for clocking to an external source.
Sample Rate Indicator
Indicates the current sample rate of the master clock. When using DA mode, the indicator
blinks if no source is present.
Sample Rate Selection Knob
This selector lets you increase and decrease the sample rate, choosing from 32kHz,
44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, 352.8kHz, 384kHz, 705.6kHz, 768kHz.
The current frequency is indicated on the display when adjusting. To confirm, simply press
the selector knob.
When clocked to an external source: Press and hold the knob for 2 seconds to fetch the
current source's sample rate and set it.
European pull up / pull down (+/- 4%)
This button t/- 4% pull ups / pull downs
USA pull up / pull down (+/- 0/1%)
This button t/- 0.1% pull ups / pull down
OCX HD User Manual
5
