Antaira Technologies - Industrial Ethernet Switches
LNX-800A-E Series - Hardware Manual - v1.0
1 Overview
Antaira Technologies’ LNX-800A-E series is a smart 8-port industrial unmanaged Ethernet switch embedded with
8*10/100Tx Ethernet ports. The RJ45 interface can also be auto-detected, so MDI or MDI-X is automatically selected and
a crossover cable is not required. All Ethernet ports have memory buffers that support the store-and-forward mechanism.
This assures that data is properly transmitted.
The LNX-800A-E series supports 12~48VDC dual power inputs, and also offers two wide operating temperature models
for either a standard temperature range (STD: -10°C to 70°C) or an extended temperature range (EOT: -40°C to 75°C). It
supports IEEE 802.3/802.3u/802.3ab/802.3x with 10/100Tx for full or half duplex data transmission.
In addition, the built-in Network Broadcast Storm Protection and built-in relay warning function will alert network engineers
whenever there is a power failure or port break. With an increasing demand for E-Mark certified products not only for the
EU but also the Middle East and African markets, this product is a perfect solution for easy network deployment in various
vehicular environments.
1.1 Product Hardware Features
System Interface and Performance
-
All RJ45 ports support Auto MDI/MDI-X Function
-
Embedded 8*10/100Tx RJ45 ports
-
Store-and-forward switching architecture
-
8K MAC address table
Power Input
-
DC 12~48V redundant, with a 6-pin removal terminal block
-
The power input specification complies with the requirements of SELV (Safety Extra Low Voltage) and the power
supply should comply with UL 61010-1 & UL 61010-2-201
Operating Temperature
-
LNX-800A-E: -10°C to 70°C
-
LNX-800A-E-T: -40°C to 75°C
Case / Installation
-
IP30 protection metal housing
-
DIN-Rail and wall-mount design
-
Installation in a Pollution Degree 2 industrial environment
1
