Antaira Industrial Ethernet Switches
LMP-0501 Series User Manual V1.0
23
5.5.2 ERPS Configuration
Below,
Figure 5.19
, shows the ERPS configuration interface.
Terms
Value Description
Protocol
“Enable” or “Disable” ERPS protocol
Ring Port 0
ERPS ring port 0, can be mapped to port 1
– port 6.
Do not set the same as Ring port 1.
Ring Port 1
ERPS ring port 0, can be mapped to port 1
– port 6.
Do not set the same as Ring port 0.
Role
Set the ERPS role as Owner, Neighbor or Normal.
[Owner]
In charge of blocking one side of RPL link. It will prevent the packet
flow from its blocked port.
[Neighbor]
In charge of blocking one side of RPL link. It will prevent the
packet flow from its blocked port.
[Normal]
Besides Owner and Neighbor node, the rest of nodes are defined
as Normal node
.
All node roles have the ability to block the port if the link attach to the port is
failed and disconnected.
Ring ID
ERPS ring ID, ranges from 1 to 239. Ring ID distinguishes different Ring
topology.
Figure 5.19
– ERPS Configuration Interface
