INDEX
Function
Parameter
Action
DC Input
11 - 15 V DC
Normal function
under 11 V or over 15 V
Display: INPUT VOLTAGE ERROR
Connected with wrong polarity
no function
Charge sockets
After pushing the Button “ENTER / Start / Stop“: no battery connected
Display: NO BATTERY
Charge sockets
After pushing the Button “ENTER / Start / Stop“: Battery connected
with wrong polarity
Display: WRONG POLARITY
Charge current
NiCd / NiMH / LiIon / LiPo / Lead Acid 0,1 - 5,0 A ± 10%
max. 50 Watt
Display: Values will be displayed
Charge end voltage
LiIon 4,1 V / cell ± 1% • LiPo 4,2 V / cell ± 1%
Lead Acid 2,45 V / cell ± 1%
Charge finished
Discharge current
NiCd / NiMH / LiIon / LiPo / Lead acid 0,1 - 5,0 A ± 10%
max. 5 Watt
Display: Values will be displayed
Discharge end voltage
NiCd/NiMH 0,1 V - 16,8 V adjustable • LiIon 2,7 V / cell ± 10%
LiPo 2,8 V / cell ± 10% • Lead Acid 1,8 V / cell ± 10%
Discharge finished
OPERATION
Connect the
xMove Deluxe
charger with the crocodile clips to a 11-15 V DC supply. Please take care to use the right polarity: red = + plus, black = - minus.
When the charger is connected in the right way you will get an audible signal and the display shows the charge menu. If the display doesn’t show anything
the power supply is not connected correctly. If the input voltage is under 11V or over 15V the display shows ”INPUT VOLTAGE”.Now connect the battery pack
with a suitable cable to the charger (Banana sockets). Please take care to use the right polarity: red = + plus, black = - minus. If the polarity of the battery
is wrong the display shows “WRONG POLARITY”. If there is no battery connected and the Button “START” is pushed the display shows “NO BATTERY”.
For further adjustments please follow the attached Menu Navigation.
MENU NAVIGATION
After you have connected the
xMove Deluxe
charger the right way you have to chose right battery type by pushing the button “BATT TYPE”. By
pushing the button “BATT TYPE” once the displayed battery type will start flashing. By pushing “BATT TYPE” again the display changes between the
battery types (NI=NiCd; NH=NiMH; LI=LiIon; LP=LiPo; PB=Lead Acid). Flashing of the battery type display will stop when pushing another button or
after a short time if no button is pushed.
By pushing the button “INC or DEC” the charger will change between “CHARGE”, “DISCHARGE” and “CYCLE”.
The last used configuration will be saved.
6
1_manual_xmove_06-12.indd 7
1_manual_xmove_06-12.indd 7
11.01.2007 16:45:38 Uhr
11.01.2007 16:45:38 Uhr
Prozessfarbe Schwarz
Prozessfarbe Schwarz