Anritsu s332e, User Manual

Page: 37 / 102

Quick Start Guide 3-4 Spectrum Analyzer
Site Master User Guide PN: 10580-00252 Rev. J 3-7
3-4 Spectrum Analyzer
Set the instrument to Spectrum Analyzer mode as described in Section 3-2 “Measurement
Mode Selection” on page 3-1 .
Set Start and Stop Frequencies
1. Press the
Freq
main menu key.
2. Press the
Start Freq
submenu key.
3. Enter the desired start frequency using the keypad, the arrow keys, or the rotary knob.
When entering a frequency using the keypad, the submenu key labels change to
GHz
,
MHz
,
kHz
, and
Hz
. Press the appropriate unit key. Pressing the
Enter
key has the same
affect as pressing the
MHz
submenu key.
4. Press the
Stop Freq
submenu key.
5. Enter the desired stop frequency.
Enter the Center Frequency
1. Press the
Freq
main menu key.
2. Press the
Center Freq
submenu key.
3. Enter the desired center frequency using the keypad, the arrow keys, or the rotary knob.
When entering a frequency using the keypad, the submenu key labels change to
GHz
,
MHz
,
kHz
, and
Hz
. Press the appropriate unit key. Pressing the
Enter
key has the same
affect as pressing the
MHz
submenu key.
The center frequency and span is shown at the bottom of the screen.
Select a Signal Standard
1. Press the
Freq
main menu key.
2. Press the
Signal Standard
submenu key. The Signal Standards dialog box opens.
3. Highlight a signal standard and press
Enter
to select.
4. Press the
Channel
submenu key to change the channel value in the Channel Editor.
The signal standard is shown in yellow at the top of the screen.
Set the Measurement Frequency Bandwidth
1. Press the
BW
main menu key to display the BW menu.
• Press the
RBW
and/or the
VBW
submenu key to manually change the values.
• Set RBW and VBW automatically by pressing the
Auto RBW
submenu key or the
Auto VBW
submenu key.
2. Press the
RBW/VBW
submenu key to change the resolution bandwidth and video
bandwidth ratio.
3. Press the
Span/RBW
submenu key to change the span width to resolution bandwidth
ratio.