monitor to 1280x1024 or use a higher than 1280x1024 resolution monitor to
connect NVR.
3. Do your have other computer monitor, please change the other monitor and use
the computer monitor to connect your system.
4. Don't connect your camera system to your wifi router and then check it working or
not
5. Remove the hard disk (also don't connect NVR to wifi router, only connect a
monitor), and then restart NVR, check it working or not.
Q2: What should I do when the camera shows "camera out of
resolution", "camera IP conflic" or one camera is no picture, etc.
a: If there is a camera without a picture
1) Checking the network cable, use another working network cable for this camera
and check whether it will work normally or not.
Does its IR Leds turn on or not when you try another network cable for it? (Use your
finger to cover its photo-resistance to confirm this information)
2) Change the camera to another channel and check whether it will work normally or
not.
3) Please check if the IP address of camera has changed and the channel is occupied,
right click the mouse, go to "Add camera", delete the camera firstly, then search and
add the camera again;
