Anolis ArcPar 100, User Manual

Page: 8 / 38

8
3.3 Installing barndoors and the gel frame
Disconnect the fixture from mains before barndoors and the gel frame installation
1.Disconnect the fixture from mains.
2. Screw the accessory frame adaptor (1) on the ArcPar 100 housing with the four screws M4x8 (2) and unlock
the spring lock (3) via pushing this spring lock as show red arrows on the picture.
3. Insert the gel frame (4) into the bottom slots of the accessory frame adaptor (1).
4. Insert the barndoors (5) into the top slots of the accessory frame adaptor (1).